Overview
Quartz rods |
|
SIO2 : | 99.9 % |
Density : | 2.2(g/cm3) |
Degree of hardness moh’ scale : | 6.6 |
Melting point: | 1732°C |
Working temperature : | 1100°C |
Max temperaturecan reach in a short time : | 1450°C |
Acid tolerance: | 30 times than Ceramics , 150 times than Stainless steel |
Visible light transmittance : | above 93% |
UV spectral regiontransmittance: | 80% |
Resistance value : | 10000 times than ordinary glass |
Annealing point: | 1180°C |
softening point: | 1630°C |
Strain point: | 1100°C |
Chemical composition (ppm)
AL | Fe | K | Na | Li | Ca | Mg | Cu | Mn | Cr | B | Ti |
5-12 | 0.19-1.5 | 0.71-1.6 | 0.12-1.76 | 0.38-0.76 | 0.17-1.23 | 0.05-0.5 | 0.05 | 0.05 | <0.05 | <0.1 | <1.0 |
Quality First, Safety Guaranteed