Our Products
High Quality for Transparent Teleprompter Glass - UV dichroic coatings on metallic reflectors – Hongya
High Quality for Transparent Teleprompter Glass - UV dichroic coatings on metallic reflectors – Hongya Detail:
| Product Details: | |
| Aluminum reflectors are provided to assist engineers to build a UV curing system without investing in extrusion dies, long lead times, and minimum draw charges. These can be used for low wattage applications in free air or forced air-cooling of UV lamps in an end cooled reflector assembly, or center cooled reflector assembly. These are commonly used for focusing uv light from a medium pressure mercury vapor lamp, uv curing lamp or metal halide lamp as metal halide reflectors.
Our extruded reflectors are made of specially processed 6061-grade aluminum. The inside surface is highly polished to yield an efficient transfer of UV energy from the uv bulb to the curing substrate. This high UV reflectance is approximately 90% and unlike other aluminum, this special grade resists tarnishing and corrosion. Enhanced reflectance liners, UV reflector liners or reflector sheets are not required; these products will typically only increase the uv reflectance, which is the amount of UV light from the ultraviolet lamp reaching the substrate by less than 5%. Three styles are available, two elliptical and one parabolic diffuser. Elliptical reflectors provide a line source. One focal point is at the center of the UV lamps the other focal point is positioned approximately 1.75″ or 3.5″ (depending on reflector used) from the bottom edge of the reflector to, the substrate. Parabolic aluminum reflector provide a collimated source and the reflectors bottom edge should be located 4 to 5 inches from the substrate. Spherical reflectors provide a non-uniform distribution of energy from UV lamps and are not offered by Hill Technical. For proper lamp operation it is important that each half of our reflectors is separated by approximately one quarter of an inch to allow for convection cooling. |
Certificate:
Product detail pictures:
Related Product Guide:
How can anything rival the threat of climate change? | Qingdao 8.38mm Building Glass
5 Barack Obama Accomplishments Republicans Pretend Never Happened | 5mm Bronze Reflective Glass For Building
Bear "Customer first, High quality first" in mind, we perform closely with our consumers and provide them with efficient and experienced services for High Quality for Transparent Teleprompter Glass - UV dichroic coatings on metallic reflectors – Hongya , The product will supply to all over the world, such as: France, Irish, Rwanda, Our company always concentrate on the development of the international market. We have a lot of customers in Russia , European countries, the USA, the Middle East countries and Africa countries. We always follow that quality is foundation while service is guarantee to meet all customers.
By Wendy from Finland - 2016.03.07 13:42
Managers are visionary, they have the idea of "mutual benefits, continuous improvement and innovation", we have a pleasant conversation and Cooperation.
By Naomi from Hanover - 2015.06.21 17:11
HOT-SALE PRODUCT
Quality First, Safety Guaranteed
