Our Products

Product Detail:

 Hongya tempered glass door is made from float glass via a thermal tempering process. Tempered glass is often referred to as “safety glass.” Solid tempered glass is more resistant to breakage than normal float glass. 

Solid tempered glass is four to five times stronger than float glass and does not break into sharp shards when it fails, which are less likely to cause serious injury.

We can make holes,cutouts,hinges,grooves,notch,polished edges,beveled edges,chamfered edges,grinding edges and safety corner as customer need.

We have passed standard of EN 12150; CE, CCC, BV  

ADVANTAGES:

1. The anti-impacting performance and anti-bending performance are 3-5 times higher than ordinary glass.
2. It breaks into granules in case of strongly knocked, so no hurt would be caused. 
3. deflection angle of tempered glass is 3-4 times larger than that of float glass of the same thickness. When there is load on tempered glass, its maximum tensile stress does not located on the glass surface as float glass, but on the central point of glass sheet.  

Color of tempered glass door : Clear ,Ultra clear, bronze,grey blue and green,We also produce frosted tempered glass door.

Reasons to use tempered glass door 12mm

Tempered glass is a type of glass with even compressive stress on the surface which is made by heating float glass to nearly softening point (600-650°c),Then cooling it down rapidly in glass surface. 
During the instant cooling process, the exterior of glass is solidified ,while the interior of the glass is cooled down relatively slowly. The process will bring the glass surface compressive stress and the interior tensile stress which can improve the mechanical strength of glass by germination and result in good thermal stability.

Products Show:

Other Metal fittings we can supply:

Production show:

FAQ:

1. How to get a sample?

You can purchase on our online store. Or send us an email about your order detail.

2. How can I pay you?

T/T, Western union, Paypal

3. How many days to prepare sample?

1 Sample without logo: in 5 days after receiving sample cost.

2.Sample with logo: normally in 2 weeks after receiving sample cost.

4. What is your MOQ for your products?

Usually,our products’ MOQ is 500. However , for the first order, we also welcome to small order quantity.

5. What about the delivery time?

In Normal, The delivery time is 20 days. depends on order quantity.

6.How do you control the quality?

We have a professional QC team . Our factory has strict control for every step of production, the quality and the delivery time.

7.What is your order procedure?

Before we process the order, a prepaid deposite is requested . Usually, the production process will take 15-20days.When the production finished ,we will contact you for shipment detail and balance payment.

Package Details: